School Cleaning Bundle
The School Cleaning Bundle includes one (1) 100-pack of disposable gloves, one (1) 50-pack of disposable masks, and one (1) gallon size Vital Oxide® disinfectant. This convenient kit is ideal for cleaning and disinfecting surfaces at school, home, work, and more. this School Cleaning Bundle comes in small, medium, and large based on glove sizes. Bundle these school cleaning items together to save 32%!
This product provides relief from: Viruses, Bacteria & Germs, Cleaning
Keep your classroom, office, or home stocked with these essential items to ensure a cleaner and healthier environment. The School Cleaning Bundle is a simple but effective kit to help you disinfect surfaces and keep germs, bacteria, and viruses at bay. The products included in the School Cleaning Bundle will help keep you protected while you clean, sanitize, and disinfect your most used surfaces. We've priced our School Cleaning Bundle to help save you 32% more than if you bought these products separately!
School Cleaning Bundle Includes:
1. Ecology Works Vital Oxide® One Gallon Disinfectant - A hospital-grade broad-spectrum antimicrobial solution designed to sanitize and disinfect surfaces. It's proven to perform against molds, mildews, fungi, spores, yeasts, viruses, and kills 99.999% of bacteria and microbials. It eliminates odors and allergens, sanitizes carpets, and removes mildew with up to six months of residual effectiveness! The Vital Oxide® formula is non-toxic, non-corrosive, and non-irritating and Vital Oxide® Antibacterial Spray has been independently tested under GPL (good laboratory practice) conditions and shows to kill MRSA, H1N1 (Swine Flu), Norovirus, Legionella Pneumophilia, and E.coli.
2. Powder Free Disposable Nitrile Gloves - Pack of 100, in sizes small, medium, and large. They provide single-use, latex, vinyl, and powder-free protection when cleaning, disinfecting, performing childcare, pet care, and other non-medical tasks. Unlike latex, nitrile gloves are synthetic, made from acrylonitrile-butadiene rubber, and boast a longer shelf life. They feature excellent puncture resistance and are three times stronger than comparable latex or vinyl gloves, making them ideal for environments with sharp edges, surfaces, or tools. Nitrile is also known for providing effective protection against most common chemicals and certain specialty chemicals as well.
3. National Allergy All-Purpose Disposable Masks - Provides breathable three-layer protection from germs, bacteria, and viruses such as COVID-19, dust, and formaldehyde. These exclusive masks are made of high-quality standard material. The inner layer features 26gsm (grams per square meter) of white non-woven soft and comfortable material ideal for direct skin contact. Each middle layer of our disposable mask is made from 20gsm of meltblown fabric effective at filtering bacteria and germs. And finally, the outer layer of this all-purpose mask is crafted from 30gsm of blue non-woven leak guard material. Additionally, our mask boasts soft skin-friendly elastic ear loops and an adjustable shape for a comfortable and conforming fit. This School Cleaning Bundle includes 50 one-time-use disposable face masks.
Ingredients:
Chlorine Dioxide, n-Alkyl Dimethyl Benzyl Ammonium Chloride, n-Alkyl Dimethyl Ethylbenzyl Ammonium Chloride, Inert Ingredients.
MSDS:
Click here to see the MSDS for Vital Oxide.
Active Ingredient:
The active ingredient in Vital Oxide is chlorine dioxide, which sounds like chlorine, but it's not. Chlorine dioxide and chlorine are very different, react differently, and result in different by-products (see chart below). Chlorine dioxide has been used in disinfecting water supplies for decades, but only now, in Vital Oxide, is there a formula that is stable enough to remain potent for home use.
| Results of Independent Study on Vital Oxide... |
|
 |
An independent study by the University of Tulsa showed that Vital Oxide was effective in controlling fungal contamination on building materials. Sheetrock treated with Vital-Oxide exhibited no fungal growth as compared to significant mold growth on the untreated control sample. In another test, one ceiling tile was treated with Vital Oxide, while only sterile water was applied to the other. Then both were exposed to toxic black mold (stachybotrys). As the image shows, the results were impressive... even after 7 months! |
Directions for Use: - Always refer to the product label for full instructions.
| Note: | Vital Oxide is safe for your family and the environment and has absolutely no chlorine smell. Vital Oxide is odorless, however, if you have previously used a chlorine-based product on the surface you are treating, Vital Oxide could react with any residue causing you to notice the smell of chlorine. |
- To Clean and Disinfect Hard Non-Porous Surfaces:
- Pre-clean surface with warm soapy water, rinse and allow to dry.
- Apply Vital Oxide full strength, enough to thoroughly wet surface.
- Allow surface to remain wet for 5 minutes for viral inactivation – 10 minutes for bacterial disinfection.
- For immersion applications, replace solution daily, or more frequently if it becomes significantly soiled or diluted.
- No rinsing required, just air dry.
- To Clean and Disinfect Floors:
- Sweep or vacuum floor to remove particles.
- Mop the floor with warm, soapy water to remove any dirt or stains, rinsing the mop with clean water frequently.
- Apply Vital Oxide at a dilution of 5 parts water to 1 part Vital Oxide.
- No rinsing required, just air dry.
- Do NOT use Vital Oxide on non-sealed wood floors.
- To Pre-Treat and Sanitize Synthetic Carpets:
- Vital Oxide can be used to treat synthetic carpet fibers, like nylon, olefin or polypropylene. Do NOT use Vital Oxide on wool carpets.
- First, prepare carpet by cleaning or vacuuming up excessive dirt.
- If carpet holds any chemicals from previously used products, be sure to clean carpet before applying Vital Oxide.
- To Pre-treat carpet stains – apply Vital Oxide at a dilution of 10oz to 1gal (128oz) to cover 200 sq. ft.
- To Sanitize carpets:
- First, test for color fastness in an inconspicuous area.
- Vacuum up any loose dirt and debris.
- Apply Vital Oxide that's been diluted 5 parts water to 1 part Vital Oxide at a rate of 1.7 gallons per 10 sq. yards (or approx. 22oz per sq. yd.). Because Vital Oxide must come in contact with contaminants in order to work, be sure to apply over the entire carpet area to be treated.
- Allow Vital Oxide to remain on carpet for 10 minutes.
- Do not rinse. Remove any excessive moisture by either blotting or wiping with a dry towel or use a water extraction wand.
- Allow carpet to air dry or use blowers or fans if quicker drying is required.
Note: Vital Oxide can also be used in a fogger for big jobs.
