Want Order Discounts?
Become a Subscriber »
|
 |
National Allergy E-Mail Newsletter - September 2003
|
Welcome
to the National Allergy E-Mail Newsletter! This month we complete our series entitled
Mold and Indoor Air Quality. In the last edition, we discussed what to look for when
investigating a potential mold problem, what types of mold might be found in your
home and took a look at do-it-yourself methods for mold testing. If you missed Part 1
of this series or you'd like to reread any of our past newsletters, you can find
archived issues
of all of them on our website. If you've determined that you have a mold problem, you
now need to take some important PRECAUTIONS, CLEAN your home of the problem, and PREVENT
further mold outbreaks - all of which we'll discuss in this edition.
In the coming months we'll have more educational
articles about the aggravating factors behind allergy, asthma, and sinus problems
and helpful things you can do to find relief. Each newsletter will also feature
a valuable coupon and contain exclusive product specials for subscribers only.
To top it off, every month we're giving away an
Austin Air HM-400 Air Purifier,
valued at $400, to one lucky subscriber!
National Allergy is committed to offering you the best information because we believe
that education is often the most effective weapon to combat many of the environmental
health issues we face. Presented below is some of the current understanding on the
subject of Mold and Indoor Air Quality from the medical and scientific community. It's
important to note that scientific research continues on this very broad subject and new
discoveries will certainly be made.
Sincerely,
The National Allergy Newsletter Team
http://www.nationalallergy.com/
P.S. Be sure to check out our exclusive offers for
newsletter subscribers only!
|
|
| |
Mold and Indoor Air Quality
Part 2: Mold Precautions, Clean-Up & Prevention
|
Safety Precautions To Take When Around Mold
As we learned last month, mold (also called mildew) is an allergy trigger that can
cause chronic sinusitis, itchy eyes, runny nose and sore throat in millions of
Americans. In addition, some molds can be toxic, emitting spores that cause
symptoms ranging from a dull headache to nausea and mental lapses. For this
reason, it is wise to limit your exposure to mold and mold spores by taking
appropriate safety measures when around it. While your environment may not host
such dangerous mold species as Stachybotrys, it is still wise to use caution
when beginning a mold clean-up project.
 Protect Your Lungs: Wear an N-95 rated respirator/mask when working around
mold. These masks, when worn properly, will prevent mold spore as well as other
allergens from entering your lungs. The N-95 rating was developed by the National
Institute for Occupational Safety and Health (NIOSH) and means the mask media
will filter 95% of all non-oil based airborne particulates. N-95 rated masks
are used by most professionals in the mold remediation business.
Protect Your Hands & Skin: Wear rubber gloves,
preferably those that extend to the middle of the forearm, to prevent inadvertent
contact with the mold contaminated area. If you are sensitive to latex, there are gloves
available made of other materials such as vinyl.
Protect Your Eyes: Mold allergen is already an irritant causing many to
have runny nose and watery eyes. Goggles are an important defense against
getting potentially dangerous mold spore in your eyes. Goggles that don't have
ventilation holes are best. Standard swimming goggles can be used for smaller
projects, but may fog if used extensively.
Cleaning Guidelines
A mold problem in your home may not call for an expensive remediation specialist.
In fact, you can breathe easier knowing that mold remediation is
often as simple as finding the source of moisture and eliminating it. It would
also be helpful to know the history of your home or apartment complex. For
example, have you or previous owners experienced water damage or leakage of any
kind? Has the foundation been inspected for moisture or seepage? Below are
some practical, cost-saving cleaning tips to help you eliminate unsightly mold
stains, and to prevent further growth:
- Repair all moisture leaks. Mold can only thrive in areas with moisture.
Water leaks and damage should be repaired within 48 hours of occurrence in order
to prevent mold growth.
- Before cleaning an affected area, lightly spray it with water or your chosen
cleaning solution. This will prevent the spores from becoming airborne as you
clean. And remember to wear gloves, goggles, and a mask as noted above.
- Scrub mold off of hard surfaces with cleaner and let dry completely. Some
porous and absorbent materials, such as ceiling tiles, that cannot be cleaned
completely may need to be thrown away or replaced entirely.
- Do not just paint or caulk over a moldy surface. First, clean the area
thoroughly, let it dry completely (24 hours if you have used a chlorine based
product), and then treat the area with No More Mildew or paint with a mold-retardant
like M-1 added to the paint.
- Clean your showers, windowsills, kitchens, basement and other areas that might
be prone to moisture and mold growth. Treat these surfaces with a mold inhibitor
such as No More Mildew.
- Closely monitor and clean appliances such as humidifiers, water based vaporizers
and air conditioning units that generate or collect moisture. Note: Arizona
and other desert-state residents may know about evaporative swamp coolers.
Believe it or not, despite the dry climate, these cooling units are major mold
culprits. Regularly clean your swamp cooler to prevent mold spore from growing
and disseminating into the air.
- Basements have all the conditions that help mold thrive. Keep your basement
clean by removing moldy articles, cleaning all surface molds, then spraying floors,
walls and joists with a mold preventative. Use a basement dehumidifier to remove excess moisture.
- Clean the air in your environment by utilizing a HEPA air cleaner.
HEPA stands for High Efficiency Particulate Arrestor and is a NASA-developed
technology that will remove airborne mold spore and other harmful allergens
(99.97% of them, in fact!) by circulating and purifying the air.
The following is a handy guide outlining some common mold-affected areas and
the best methods for cleaning them. Again, remember to wear gloves, goggles,
and an N-95 rated mask during cleanup. Also, please note that these guidelines
are for surface areas of 10 square feet or less. If the evidence of mold covers
more than 10 square feet, you should seek
professional consultation as it may be endangering your health and could
require containment:
| Material or Finishing Affected | Cleanup Methods | Personal Protective Equipment |
| Books and Papers | 3 | N-95 respirator, gloves, and goggles |
| Carpet and Backing | 1, 3 |
| Concrete or cinder block | 1, 3 |
| Hard surface, porous flooring (linoleum, ceramic tile, vinyl) | 1, 2, 3 |
| Non-porous, hard surfaces (plastic, metals) | 1, 2, 3 |
| Upholstered furniture and drapes | 1, 3 |
| Wallboard (drywall and gypsum board) | 3 |
| Wood surfaces | 1, 2, 3 |
- Method 1: Wet vacuum (in the case of porous materials, some mold spores
or fragments will remain in the material but will not grow if the material is
completely dried). Steam cleaning may be an alternative for carpets and some
upholstered furniture.
- Method 2: Damp-wipe surfaces with plain water or with water and detergent
solution (except on wood - use wood floor cleaner); scrub as needed.
- Method 3: High-efficiency particulate air (HEPA) vacuum
after the material has been thoroughly dried. Dispose of the contents of the
HEPA vacuum in well-sealed plastic bags.
|
From the EPA - Mold Remediation in Schools and Commercial Buildings - Table 2: Guidelines for Remediating Building Materials with Mold Growth Caused by Clean Water.
Prevention: Easier Than You Think!
Even if you live in a very humid area or your hometown has seen more rain
than usual this summer, you are not necessarily resigned to having mold
problems. The following tips will help you to keep moisture and humidity
from turning into a potentially dangerous mold problem.
- Monitor humidity and temperature levels in your home regularly. Humidity
levels should not be above 60%.
- Provide adequate ventilation and air circulation in the home by installing
exhaust fans and opening room doors and windows (individuals allergic to pollen
or sensitive to other outdoor pollutants should use discretion about keeping
windows open).
- Keep a close eye on areas prone to condensation. Cover cold surfaces with
insulation and increase the air temperature when condensation begins to appear.
- In the bathroom, run the vent fan or open windows during and after a shower
so that the moisture can dissipate. Use a mildew resistant shower curtain that
can be easily laundered. Avoid using carpeted surfaces that absorb moisture.
Use a mold-inhibiting paint or M-1 Paint Additive.
- Avoid foam-rubber upholstery and bedding items as they are more prone to
mold growth. Bedding encasings are a
good precaution against mold growth and they keep away the dust mites too!
- Keep a limited number of houseplants, and try adding a mold-preventative to the soil.
- Vent your clothes dryer to the outside of the house and do not let clothes
sit for long in damp heaps, in or out of the washer.
- Periodically check carpet laid directly on concrete surfaces as the
carpeting can absorb moisture. Consider covering concrete floors or crawl-space
floors with plastic sheets or tarps in moisture-prone areas.
- If necessary, use an electric dehumidifier
to keep the relative humidity below 60%.
When It May Be Time To Get Help
Duct Cleaning is normally recommended for homes that are 15 to20 years old; for
homes that have been flooded or suffered water damage; and in instances where a
surface-sample mold test reveals mold spore within your ducts and component
parts. Should you deem it necessary to have your ducts cleaned, be aware that
it will stir up the allergens within your ductwork. As a precaution, we recommend
that children and sensitive adults limit their exposure to the air in the home for
24 hours while a HEPA filter purifies the new air.
As stated above, mold problems affecting less than 10-square foot areas are
manageable by homeowners. When the affected area is greater than this, the EPA
and other agencies advise seeking professional assessment. If you are concerned
with specific items that may have mold infestation, particularly those of
sentimental or monetary value, consult a specialist to help you clean these
items. Finally, should a do-it-yourself mold test reveal the presence of
Stachybotrys mold, you should avoid any exposure to the area and seek professional
help immediately due to the high toxicity of this dangerous mold.
You can find a mold remediation specialist by visiting the
American
Industrial Hygienist Association website and searching for a consultant in your area.
Also check the yellow pages under Mold and Mildew or Indoor Air Quality.
Most telephone directories list a variety of specialists in restoration,
conservation, furniture repair and cleaning, etc.
If you have specific questions about mold, e-mail us at
newsletter-questions@nationalallergy.com and we'll do our best
to help.
Stay tuned next month for another look at the aggravating factors behind allergy,
asthma, and sinus problems and helpful things you can do to find relief, an
exciting coupon, more exclusive offers, and another chance to win an
Austin Air HM-400 Air Purifier.
|
|
| |
This Month's Exclusive Offers - Expire 10/17/2003!
|
|
|
|
|
|
|
Dust mites need high humidity to live and multiply in your bedroom and carpeting. Humidity under 40% actually kills and eliminates them altogether because it's too dry for them to survive. So you can see why it's important to keep an accurate check on humidity levels in your home. Our Acu-Rite digital monitor is a quality instrument that has been engineered to provide accurate humidity, temperature & time readings. Newsletter subscribers save $5!
|
|
This combination of products is designed to get you started in the mold clean-up process and contains: The 3M 8233 N100 Mask/Respirator, one gallon of NAS-12 cleaner, one gallon of No More Mildew preventer, and one pair of heavy-duty Allerderm vinyl gloves. When buying all these products together, you save over 15% from buying these products separately!
|
To take advantage of the offers in this newsletter, be sure to subscribe by clicking here. After subscribing, you will have an opportunity to read the current newsletter complete with the promotional codes.
|
|
| |
Help Your Friends
People you care about can benefit from allergen avoidance. Help them learn more about minimizing the allergens in their environment by sending them this issue of the National Allergy E-Mail Newsletter. They'll thank you for it!
|
| | |
|
The National Allergy E-Mail Newsletter is (c) 2003 National Allergy Supply, Inc. All Rights Reserved. No part of this Newsletter may be reproduced in whole or in part without written permission.
All trademarks not owned by National Allergy Supply, Inc. or its subsidiaries that appear in this newsletter are the property of their respective owners, who may or may not be affiliated with, connected to, or sponsored by National Allergy Supply, Inc. or its subsidiaries.
National Allergy Supply, Inc.
1620-D Satellite Blvd.
Duluth, GA 30097
1-800-522-1448
|
|
Your Cart - items
